Wireless routers are becoming more and more popular. They have many uses, one of which is viewing pictures and movies from your computer on your television. This comes in very handy when you have media files that you can’t burn on CD or cannot be played on your DVD player.

A second use would be to transmit paid television. For example if you paid for HBO usually you would be able to only view it on one nominated television. With the wireless media router you can send the signal you television is receiving, HBO, to any other television in the house. You can even change the channel from the remote television while viewing.

The third use would be watching television at a location where an antenna is not available. This means no more long cables leading from room to room just to be able to watch television.

Depending on the amount of receivers you have you can receive the signal from multiple televisions. How does it work? The receivers are connected to the remote televisions. The router takes the signal from the source television and distributes it to the remote televisions by way of the receiver. On the remote television a certain channel is dedicated to this receiver meaning you can watch independent television, and easily switch the channel to the signal being received from the wireless router.

This also makes running your entertainment room a breeze. The receiver can also be hooked up-to a projector making it easy to view anything you wish. This means you will not need to purchase separate DVD players VCR’s for every room.

Well, there is something you should realize. Working from home while using a wireless local area network (WLAN) may lead to theft of sensitive information and hacker or virus infiltration unless proper measures are taken. As WLANs send information over radio waves, someone with a receiver in your area could be picking up the transmission, thus gaining access to your computer. They could load viruses on to your laptop which could be transferred to the company’s network when you go back to work.

Believe it or not! Up to 75 per cent of WLAN users do not have standard security features installed, while 20 per cent are left completely open as default configurations are not secured, but made for the users to have their network up and running ASAP. It is recommended that wireless router/access point setup be always done though a wired client.

You can setup your security by follow these steps:

1. Change default administrative password on wireless router/access point to a secured password.

2. Enable at least 128-bit WEP encryption on both card and access point. Change your WEP keys periodically. If equipment does not support at least 128-bit WEP encryption, consider replacing it. Although there are security issues with WEP, it represents minimum level of security, and it should be enabled.

3. Change the default SSID on your router/access point to a hard to guess name. Setup your computer device to connect to this SSID by default.

4. Setup router/access point not to broadcast the SSID. The same SSID needs to be setup on the client side manually. This feature may not be available on all equipment.

5. Block anonymous Internet requests or pings. On each computer having wireless network card, network connection properties should be configured to allow connection to Access Point Networks Only. Computer to Computer (peer to peer) Connection should not be allowed.

Enable MAC filtering. Deny association to wireless network for unspecified MAC addresses. Mac or Physical addresses are available through your computer device network connection setup and they are physically written on network cards. When adding new wireless cards / computer to the network, their MAC addresses should be registered with the router /access point. Network router should have firewall features enabled and demilitarized zone (DMZ) feature disabled.

All computers should have a properly configured personal firewall in addition to a hardware firewall. You should also update router/access point firmware when new versions become available. Locating router/access point away from strangers is also helpful so they cannot reset the router/access point to default settings. You can even try to locate router/access point in the middle of the building rather than near windows to limit signal coverage outside the building.

There is no guarantee of a full protection of your wireless network, but following these suggested tips can definitely lessen your risk of exposing to attackers aiming at insecure networks.

Imagine you are sitting by the pool and enjoying chatting through the Internet. Or lounging in the Jacuzzi listening to your MP3 collection is appealing to us all. Unfortunately, many, or even most, wireless units don’t come with security features already functioning. This may not seem like a big issue to someone who is simply setting up a home network, but there are a number of potential problems you should consider.

Identity theft seems to be the most serious problem. If your network is unsecured, the personal data on your wireless electronic equipment is also unsecured. The order you just placed for a book at Amazon may have given your contact and payment information to an unscrupulous hacker! Nearly every town in which “WiFi” is common will have “War Drivers” and “War Chalkers” at work. These are people who walk or drive around town with wireless equipment, searching for unsecured networks. The “Chalkers” then live up their name, marking curbs and other public items with chalk so that others can more easily find and exploit your network.

In fact, not all “War Drivers” are hackers, of course. Many just want to use your network for free, but the risk is high if you don’t learn how to protect yourself. You can usually find quite a bit of free information as to how to secure your network at the website of your router’s manufacturer, or by doing a search in a search engine for a phrase like “secure home wireless.”

In addition, there are also your neighbors who may find your network by accident and enjoy nosing into your activities and using your Internet access at will, slowing down your network speed in the process.

Even many businesses use cheap, home-use quality equipment for their company networks. With the poor security often found on small business networks, anyone with a basic knowledge of wireless can access sensitive company and customer data.

It is highly recommended that you hire service companies to secure your network for you, or else you will have to bear with a risk of being exploited. A search of your local yellow pages or an inquiry at your neighborhood computer store should yield professional help and get your private data private again.