By
admin on Wednesday, December 9th, 2009 |
No Comments
There are more and more individuals opting to work from home than ever before. The advantages to this are many including avoiding the morning and evening rush hours, being able to spend time with your kids and significant other, and doing everything on your own time. Though the pitfalls are many, the one that I will be focusing on in this article is that of setting up a secure wireless network for your home based business. Right now somewhere out there, there is someone with a receiver waiting to pick up on an unsuspecting person’s wireless local area network. Their hope is to garner some sensitive information that may lead to identity theft, and stolen proprietary business information.
Most businesses owners are not technically inclined, though they may be power users, in general security settings is not one of the first things they want to mess around with in their day to day operations. This makes most wireless LANs a great target for information predators.
Here are some general guidelines to follow in setting up your wireless network. Though it may vary from vendor to vendor, the gist is more or less the same:
1. Setup the wireless access/router point via a wired client.
2. Always change the factory setting password to something difficult for someone to guess.
3. Enable 128-bit Wired Equivalency Privacy (WEP) encryption on both your access point and network card. From time to time change the WEP key entries. If your hardware does… Read the rest
By
admin on Monday, November 9th, 2009 |
No Comments
Wireless networks work using radio waves instead of wires to transmit data between computers. That’s the simple version. If you’re curious to know what’s going on in more detail, then it’s all explained in this article.
Ones and Zeros.
I’m sure you know that computers transmit data digitally, using binary: ones and zeros. This is a way of communicating that translates very well to radio waves, since the computer can transmit ones and zeros as different kinds of beep. These beeps are so fast that they’re outside a human’s hearing range — radio waves that you can’t hear are, in fact, all around you all the time. That doesn’t stop a computer from using them, though.
Morse Code.
The way it works is a lot like Morse code. You probably already know that Morse code is a way of representing the alphabet so that it can be transmitted over radio using a dot (short beep) and a dash (long dash). It was used manually for years, and became a great way of getting information from one place to another with the invention of the telegraph. More importantly for this example, though, it is a binary system, just like a computer’s ones and zeros.
You might think of wireless networking, then, as being like Morse code for computers. You plug a combined radio receiver and transmitter in, and the computer is able to send out its equivalent of dots and dashes (bits, in computer-speak) to get your data from one place… Read the rest
By
admin on Saturday, October 10th, 2009 |
No Comments
People have more flexible time due to wireless network. Thanks to the invention of wireless. People can now work from home while taking care of their kids or doing house works. No more stress from traffic jam anymore. Is this great?
Well, there is something you should realize. Working from home while using a wireless local area network (WLAN) may lead to theft of sensitive information and hacker or virus infiltration unless proper measures are taken. As WLANs send information over radio waves, someone with a receiver in your area could be picking up the transmission, thus gaining access to your computer. They could load viruses on to your laptop which could be transferred to the company’s network when you go back to work.
Believe it or not! Up to 75 per cent of WLAN users do not have standard security features installed, while 20 per cent are left completely open as default configurations are not secured, but made for the users to have their network up and running ASAP. It is recommended that wireless router/access point setup be always done though a wired client.
You can setup your security by follow these steps:
1. Change default administrative password on wireless router/access point to a secured password.
2. Enable at least 128-bit WEP encryption on both card and access point. Change your WEP keys periodically. If equipment does not support at least 128-bit WEP encryption, consider replacing it. Although there are security issues with WEP, it represents minimum… Read the rest
By
admin on Saturday, July 11th, 2009 |
No Comments
Wireless networks use radio waves instead of wires to transmit data between computers. Here’s how:
The Binary Code: 1s and 0s
It’s well known that computers transmit information digitally, using binary code: ones and zeros. This translates well to radio waves, since those 1s and 0s can be represented by different kinds of beeps. These beeps are so fast that they’re outside the hearing range of humans.
Morse Code: Dots And Dashes
It works like Morse code, which is a way to transmit the alphabet over radio waves using dots (short beeps) and dashes (long beeps). Morse code was used manually for years via telegraph to get information from 1 place to another very quickly. More importantly for this example, though, it is a binary system, just as a computer system is.
Wireless networking, then, can be thought of as a Morse code for computers. You plug in a combined radio receiver and transmitter, and the computer is able to send out its equivalent of dots and dashes (bits, in computer-speak) to get your data from here to there.
Wavelengths And Frequencies
You might wonder how the computer can send and receive data at high speed without becoming garbled nonsense. The key to wireless networking is how it gets around this problem.
First, wireless transmissions are sent at very high frequencies, which allows more data to be sent per second. Most wireless connections use a frequency of 2.4 gigahertz (2.4 billion cycles per second) — a frequency similar to mobile… Read the rest